Appearance
What's new
Every release is listed here, newest first. Everything on this page is already live at post.kapnetix.ai. There is nothing to install: sign in and it is there.
Throughout, a take is one recorded motion-capture performance, and a region is one span of frames on one marker inside a take.
2026-11-05
Cancel a clean that is running
On the Clean screen, Cancel run now stops a running clean after it asks you to confirm. Until now that button only took you back to the options while the clean carried on. The take that is being cleaned finishes the step it is in first. Takes that have not started yet are skipped and keep the state they had before the run. The run then reads Run cancelled with the number of takes it skipped, on the Clean screen and in the Jobs tray under the bell. If the run finished before your cancel arrived, the Clean screen says how it ended.
Cleaned + original downloads as one zip file
When you export a take with Cleaned + original in the Export dialog, you get one zip file. It holds the clean, the raw capture and, when regions are marked for a hand fix, the notes file that lists them, so your browser no longer asks whether Post may download several files. The confirmation in the dialog now says one zip file only when the download is a zip, and it no longer offers the notes file as a separate link when the notes are already inside the zip.
Long fills now count as hand work after the clean
A fill is the AI's reconstruction of motion the cameras never saw. When we compared our fills with files that artists finished by hand, the artists moved a growing share of each fill as the fill got longer. The quality score after a clean now charges every fill that is longer than about 6 frames at 120 frames per second. The charge grows with the length of the fill, is higher when Post could not confirm the fill in the delivered file, and is higher again when a join at either end of the fill is still rough. A fill never costs as much as leaving the gap open, so filling a gap always raises the score, and short fills still cost nothing. A take made mostly of long fills can therefore read Review or Manual after the clean, and those fills are the ones to check first on the Review screen. See How much hand work to expect.
Cleans of takes with two performers no longer fail
A clean of a take with two performers could fail every time with a message about validation errors, and Retry failed the same way. It happened when the clean joined a short gap to a neighbouring fill, or when it marked a one-frame glitch in the capture beside a marker swap, because Post could not read the result the cleaning sent back. Those cleans now finish, and if a cleaning result ever cannot be read, the take says so in a plain sentence. A take that failed this way cleans when you run it again from the Clean screen.
Notifications for finished runs arrive, and deleted projects are counted
When a clean run finishes, the bell now shows one notification that says the batch finished or that a take failed. Until now, a finished run could end without any notification, so the bell was not a reliable sign that a long run was done. A run you cancelled sends no notification. In Account & workspace, under Billing & usage, the Deleted projects row of Usage by project now says how many projects were deleted, such as 3 projects, deleted., and that their usage still counts toward this cycle.
2026-10-31
Keep the raw capture, and see what you exported
When a clean scores lower than the raw capture, the banner on the Review screen now offers Keep raw instead. The raw capture then becomes the version to approve and export, the take reads Raw (kept), and the clean stays in the version history, where Undo brings it back. The confirmation after Keep raw instead now shows only right after you press it and goes away after about 10 seconds, and Use this version on any version in the version history on the Data screen makes that version current again. The version history on the Data screen marks the version that is current, rather than always the newest clean. The Export dialog opens on the current version and marks it Recommended. After an export, the take reads Exported with the date, such as Exported 30 Oct, the version history lists every export with its file name, and exporting the same version again asks first. Cleaned + original now arrives as one zip file that holds the clean and the raw capture, so your browser no longer asks whether Post may download several files. When regions are marked for a hand fix, a notes file lists each one with its marker, its frames and its seconds. On the Review screen, each region under Needs your eyes now takes a decision (Accept, Mark for hand fix or Revert), a repaired region with a Manual score is listed there too, and once every region is decided Approve Clean v2 marks the take Approved and makes Export the next step. The Review screen now has three columns: the regions to check on the left, the viewer in the middle looping the selected region with 10 frames on each side (Space plays and pauses it), and on the right the selected region with one line saying what to do with it, such as Look for: and what to look at, a Why? disclosure, the decision buttons and Approve. On the Data screen, each take now has a single action that reads Diagnose before its first diagnosis and Diagnose again after it, the version cards and the Before you export box in the Export dialog now say what is left to check on the version you selected, and the Help menu links to Deciding each region and approving the take. On the Review screen, Repaired and verified is now closed until you open it and stays the way you left it until you close the browser tab, the group headings stay at the top of the list while you scroll, and [ and ] walk the regions in the order the list shows them. On the Clean screen, the Cleanup Plan, the list of steps Post takes on a take, now stays on screen after you press Clean, and when the finished run found a different number of regions or frames than the plan, one sentence under the result says what changed. When a clean is running, the Clean screen now shows its progress after you reload the page or open Clean in another tab, with the take that is being cleaned selected. While a clean runs, the button that takes you back to the options now reads Leave this run, because the clean carries on and you can follow it in the Jobs tray under the bell. See Versions, Keep raw and the export record.
Marker names are kept as in the file unless you choose otherwise
A cleaned take now keeps its marker names exactly as the file has them, in Assisted and in Auto. Until now, Post put the performer's name in front of every marker name by default, so a file without performer names came back with every marker renamed. On the Clean screen, Assisted now shows Marker names in the output with two options, Keep as in the file and Add the performer name. When the diagnosis shows two or more performers sharing marker names, Add the performer name is tagged Recommended with a sentence saying why, and it is still not selected for you. See Performer names on marker labels.
The screens are now called Diagnose, Clean and Review
The three screens between Data and Export have new names that say what you do on them. The screen once called Before is now Diagnose, where you see what the diagnosis found in a take before anything is cleaned. The screen once called Run is now Clean, where you choose what to clean and start the cleanup. The screen once called After is now Review, where you check the cleaned result. A link to a take and every link into these docs keep working. A reload or a link you share now opens the same screen on the same take, and the browser's Back button moves between the screens. A link to a take that has not been cleaned yet opens Review on that take, says it has no clean to review yet and offers its next step, such as Clean this take. A few labels changed with the names. The list of regions to check on Review is called Needs your eyes. The cleanup forecast uses the band words where they mean the same thing, so a take reads OK, Review (predicted), Significant effort or Manual, and a forecast never reads like the take's state. Takes waiting for a cleanup are listed under To clean. The button at the top of Review reads Export Clean v2, naming the version it exports. A region card whose repair was not used reads Not repaired. The original frames were kept. A card that needs your eyes names the one thing to look for where there is one, such as Look for a kink where the repair joins the captured frames. On the Data screen, a take that has not been cleaned yet shows its predicted quality badge and no forecast chip beside it, because the two used the same words for different things. The forecast for each shoot day is still in the line above the list. Older entries on this page use the old screen names.
The header of the Diagnose screen now shows the selected take's predicted quality, its cleanup forecast band, such as Manual, and about how many minutes of hand work to expect. Hold the pointer over the minutes to read how the figure is worked out. Each region card says where it is, for example frames 120 to 180. The list opens on its first card, the panel on the right describes that same card, and the list scrolls to whichever region you select. A region where a marker jumped off its own path reads Jump · repaired as a gap on its card and in the panel.
Quality and state now read the same way on every screen. A take's quality is a badge with a word, a shape and a score from 1 to 99: OK with a circle from 80, Review with a square from 55 to 79, and Manual with a triangle under 55. The badge says predicted before a take is cleaned and measured after it. A region or a marker shows its band without a second score. Beside the badge, a plain chip says where the take is, such as Raw or Cleaned v2, and a cleaned take shows the score it was diagnosed at and the score it was cleaned to, such as 55 → 99. The arrow and the second number are green when the score rose and red when it fell. A take that needed no cleaning reads Raw with an OK badge and good as captured. The header of the Review screen counts the cleaned takes with nothing left to check, such as 3 of 4 reviewed, instead of showing an average. A selected row or card is outlined in dark purple. See How much hand work to expect.
One set of words for regions, and counts that say what they count
A region is one span of frames on one marker inside a take. Post used several different words for the same thing, and the screens did not agree. A count of regions now reads regions, a region still open after a clean is a region that needs eyes, and a closed one is repaired, on every screen and in these docs. The word errors is kept for what the diagnosis detects, on the error matrix and the error list of the Diagnose screen. On Diagnose, the region list header reads Region 195 of 246 for the selected region, and a row that rolls up several regions shows the band of its least fixable region. Large numbers on the chart axes are grouped, such as 14,063. On Projects, a take row shows its forecast band once, and you can click the band to show only the takes that have it. The forecast line for takes with no shoot day set is named after their upload date, the same as the list below it. Opening Diagnose on a new project with no takes now shows that project as empty, instead of the takes of the project you had open before. The Jobs list under the bell now also shows the diagnoses Post runs in the background, says which step each diagnosis is on, and gives the reason when one fails. When a diagnosis fails, the Clean screen now gives that same reason under the take in Cannot be cleaned yet, and says that Diagnose again on the Data screen runs it again. See Quality bands and take states.
Controls that did nothing are hidden or marked as coming soon
A few controls looked like they worked and did nothing. Open in Maya / MotionBuilder on the Review screen is hidden until the plugin is released, and the plugins on the Account screen are marked Coming soon. In the Upload dialog, the shoot day is shown as By upload date without a menu arrow, and the dialog says that you can move a take to another shoot day from the Projects screen. The Solve constraints, such as bone-length lock, are listed as Coming soon on the Clean and Account screens instead of as switches. In the Export dialog, the format, the contents and the destination are cards you pick from, and converting to another format is marked NEXT because it is not available yet. See Supported formats.
The Review screen opens with the regions that need eyes
A region is one span of frames on one marker inside a take. The panel on the right of the Review screen now leads with its verdict, which says how many regions need your eyes, such as Needs your eyes · 12 regions, or Verified · nothing left to check when nothing is open. The take's grade beside it matches the grade in the queue, and a take with regions that need eyes now reads Cleaned ✦ instead of Cleaned ✦✦✦. The region cards open in three groups. Needs your eyes comes first, and each card in it ends with one line saying what to do, such as Look for a kink where the repair joins the captured frames. Repaired and verified is folded behind one line per error type. Left as captured comes last: a jitter span too short to smooth and a region outside the cleanup you chose are kept as recorded on purpose, no longer count as needing eyes, and identical cards there fold into one row, such as 50 one-frame jitter spans left as captured. Tour regions that need eyes now steps through only those regions, as Region 3 of 12 with Back, Next and Stop, and the list scrolls to each one. Cards name the kind of repair in words, such as Solve · Gap fill. The repair models, the cleaning worker build and the planner's own notes are under Details for support, which workspace owners and admins see, and the app's build is under Help, in About this build. See Review: the measured result.
2026-10-30
Props are cleaned and listed beside the performers
A prop is an object a performer handles during a take, such as a box or a staff, tracked with markers of its own. Post now repairs props. It first checks that a prop keeps its shape, and then places a missing prop marker from the prop's other markers. Where at least 3 of them were visible on every frame of the gap, they fix the prop's position throughout the gap. Where fewer were visible on some frames, Post interpolates the prop's pose across the gap and the region card asks you to check those frames by eye. A prop whose markers do not keep their distances is not treated as rigid, and its card says what happened instead. Swapped prop markers are put back the same way as a performer's. In the viewers on the Diagnose and Review screens, each prop is drawn and listed beside the performers as Prop followed by its name, with its own count of regions, and its regions are listed under it. The Projects screen and the Audit block on the Review screen say how many props a take has, how many were repaired and how many still have open frames. Where a group of a performer's markers swapped labels at one frame and kept them, for example the left and right arm, the region card now reads Label break, held as recorded. Post keeps those frames as they were recorded so that you can fix the labels in your capture software. See Props.
Region cards on the Review screen agree with the take's review status
A region is one span of frames on one marker inside a take, and its card on the Review screen says what Post changed there. Some cards, and one count in the Cleanup Plan, disagreed with the take's status in the review queue. These are fixed.
Where a fill meets the captured frames, each join has a limit on how sharply the marker may change speed. A card used to say a join changed speed "more sharply than it physically can" while the take read No review needed. The limit is one Kapnetix sets for a smooth join, not a physical one, and the card now says so. A region with such a join now counts as a region that needs eyes, so the take asks for a review, and the count above the region cards is the joins the cards name.
A repair that shipped with no score, or a score of 0, used to show an empty bar with no explanation. The card now says why, and the region counts as a region that needs eyes.
Where a join could not be smoothed because the frames beside it are captured frames that Post replaced or moved, the card used to say the fill was written over captured frames. It now says which captured frames were replaced or moved, how many, by at most how far, and that they are counted as changed. Join frames are listed from first to last.
In the Cleanup Plan, the list of steps Post ran on a take, a planned gap that came out as part of a neighbouring fill used to be counted as left open on a take with no frames left open. It is now counted as done, absorbed into a neighbouring fill. See Joins that still change speed too sharply.
2026-10-29
A take with regions that need eyes is never marked No review needed
A region is one span of frames on one marker inside a take. On the After screen, the needs-review queue used to label a take by its overall After figure alone. A take with a few regions that needed eyes, such as a spike left in the file or a gap that was not rebuilt, could read Cleaned ✦✦✦ and No review needed, and the screen header did not count it among the takes that need eyes. Now such a take says how many of its regions need eyes, moves up with the takes that need review, and counts in the header. The stars still grade the take as a whole. While Post is still counting a take's regions, its status says so, and a take whose regions could not be counted asks for a review. The Projects screen now says the same beside each Clean version. See Quality bands and take states.
A repaired marker swap no longer lowers the After figure
A marker swap is two marker labels trading places, which Solve · Relabel repairs. When Post repaired one, the confidence figure on the After screen counted the corrected frames on the second marker of the pair as changes nobody asked for. A take could then read lower with the swap repaired than with it left in place. A repaired swap now counts as repaired on both markers, so the figure goes up when the swap is fixed. See Confidence is fixability.
The After screen says what was filled as a best attempt and what was kept
The panel above the region cards on the After screen now says how many gaps Post filled as a best attempt and asks you to check them by eye. It also says how many frames Post left open because any fill there would move a marker faster than a real body part can move, and how many short stretches of captured frames inside gaps it kept as they were recorded. Each sentence appears only when its count is not zero. On a region card, the captured frames Post moved to join a fill now sit on a line of their own, and a stretch kept inside a gap is described as kept rather than moved. When Post kept a stretch of captured frames inside a gap that it had first planned to replace, the region card now says only that the stretch was kept, instead of saying the same frames were both replaced and kept. See The rule behind all of it.
The After screen explains three more kinds of repair
A region card on the After screen now says when Post found a stretch of captured frames where a marker had left its path, for example to follow another marker, and replaced that stretch or moved it to the marker it belonged to. The card says how far the marker had strayed, in centimetres. Post also now attempts gaps that the diagnosis, the first pass over your take, did not flag. Their cards say the gap was filled as a best attempt and ask you to check it by eye. Where a fill still meets the captured frames with a sharper change of speed than the marker can make, the card says at which frame and why that join could not be smoothed. The panel above the region cards counts each of these, and each sentence appears only when its count is not zero. See Stretches where a marker left its path.
2026-10-28
Every gap gets at least a best-attempt fill
When the usual repair of a gap could not be completed, Post used to leave the gap open in the cleaned take. It now fills that gap as a best attempt: a plausible bridge between the captured frames, not a reconstruction of the recorded motion. The region card on the After screen says the gap was filled as a best attempt and why the usual repair could not be completed, names the model as Best-attempt fill, and asks you to check those frames by eye before you export. These regions count as regions that need eyes and show no score. See Best-attempt fills.
A filled gap with a spike inside says both
A spike the diagnosis named can sit inside a gap that Post filled. The region card on the After screen used to call the whole region a spike that was left as recorded, while it also offered a Revert button for a fill it did not mention. Now the card says the gap was filled first, then that the spike inside it was left as recorded, then what Revert does: it removes the fill, and the spike stays either way. The card and the error list both call the region a gap. A spike that Post left alone and did not fill around keeps its own card, with no Revert button. See Spikes the diagnosis named far over the limit.
Every take launches with the options it shows
On the Run screen in Assisted mode, Post now sets the error types to fix for every ticked take from that take's own diagnosis, whether or not you open its options. Before, a take whose options you never opened was sent with every repair switched on, so the same take could be cleaned two different ways depending on what you had clicked. The options for each take now say in one sentence what the run will repair in it, and Clean N files waits until every ticked take has been read. See Clean: Auto or Assisted.
A marker swap is counted as a swap
A marker swap is two marker labels trading places, which Solve · Relabel repairs. Some swaps are found by the check that also finds spikes, and those were counted as spikes. The Run screen then said no marker swaps were detected and switched the swap repair off. They are now counted, coloured and offered as marker swaps on the Before and Run screens, and they no longer add to the spike count.
2026-10-27
Large spikes are repaired or clearly left for you
Some spikes are so far over what a real body part can do that they cannot stay in a clean take. For each one the diagnosis named, Post now tries a short repair that moves no captured frame more than 10 cm. When none clears, the frames stay as they were recorded and the region card on the After screen says Spike not repaired with the reason, instead of looking like a finished fill. Under the take name the screen counts these spikes and how many were repaired. See Spikes the diagnosis named far over the limit.
Fills that join at a gap's edge say what they moved
The frame or two next to a gap are the least reliable frames a marker has. To join a fill smoothly, Post may now move up to two frames on each side of a gap, each by at most a short distance. Every region card where that happened says how many frames moved and the farthest distance in centimetres, and the After screen gives the take total under the take name. See Captured frames beside a gap.
2026-09-20
This was a large update to cleanup.
See the plan before you press Clean
Every take now gets its own Cleanup Plan. Assisted is the mode on the Run screen where you choose the options for each take yourself. Tick a take there and a third column appears. It is the Cleanup Plan: the list of steps Post will take on that take, in the order it will take them. Small gaps are filled first, then longer ones, and a fill is the motion Post writes into a gap where a marker was not seen. After that Post joins those fills to the motion on either side, removes jitter, which is a short sharp spike in the path of one marker, and checks its own work. After the run the same list shows how each step ended, in one of four words: Done, Not needed, Still waiting or Did not land. Nothing is hidden behind a spinner any more. See The Cleanup Plan.
Know how much work a take needs before you start
Right after a take is diagnosed, it is rated for how much work it will be. The rating is one of four words, called bands: Clean, Light cleanup, Significant effort or Hard. It shows as a badge on the take row, and as a percentage headline for each shoot day. A shoot day is the group of takes you captured on one day. Use the rating to decide where to spend your time. Let the light ones run in the background and look at the hard ones yourself. See Cleanup forecast.
Jitter is now cut, not smoothed over
A short, sharp spike is a marker mis-tracked for a frame or two. Those frames are now removed and the trajectory is rejoined cleanly, instead of the spike being averaged into its neighbours. You choose how sensitive this is, per project or per take, with a setting called jitter sensitivity. Two rules stay in place always: Post never creates a spike it did not find, and a repair can never move a marker faster than a human body can move. See Jitter.
Fills that land
A fill is the motion Post writes into a gap. Gap fills now match the speed of the marker on both sides of the gap, so the join does not jump. A marker that flickers in and out is filled as one stretch instead of many small ones. And if Post cannot fill a gap well, it leaves the gap and tells you, because a hole you can see beats a fill you cannot trust. See Fills, seams and holes.
Repair details name the measured frames a fill replaced
Filling a flicker run in one pass means a few frames your raw take still shows get replaced along with the gaps. Your raw take is the file you uploaded, which Post never modifies. The region card on the After screen, where you read a finished run, now says how many measured frames a fill took over. Expand the card and it lists each stretch: the frames, the check that consumed it, and how far the fill ended up from the samples it replaced.
Gaps that could not be repaired are explained
The After screen used to describe every remaining hole as the performer leaving the capture volume. It now tells a genuine exit apart from a capture dropout and from a section that was never assessed. For each kind it gives the count, the frames and the duration, says where to find them, and says that re-cleaning will not fill them.
Your file stays your file
Cleaned C3D exports are written by patching your original file, so channel order, parameter groups and analog data stay exactly as your pipeline expects. The export dialog tells you what format was written and, if it differs from what you uploaded, why. One click reverts any region to the raw capture. See Supported formats.
Long takes finish
Diagnosis and cleanup now get up to two hours each. Long, multi-performer takes that used to stop at ten or thirty minutes now run to the end.
Straight answers
- Sometimes a take cannot be cleaned at all. A solved skeleton with no marker cloud is one example, and a file with nothing in it that could be identified as a performer is another. The Data, Run and After screens now show the reason in the cleaner's own words, and they stop offering a retry that would be refused the same way. A take whose diagnosis failed now has a Re-diagnose button that actually re-runs it.
- An expired sign-in returns you to the sign-in screen with the reason. It used to draw an empty workspace, which looked like your projects and takes had disappeared.
- Take registration and upload-ticket requests are checked against the published API schema, so a missing, blank or misspelled field comes back as a message naming that field rather than a server error with an empty body. If you script against the API, note one more change. A body carrying a field the endpoint does not accept, including the read-only
ownerId, is now refused instead of quietly ignored.
Upload and Data screen corrections
The first project you create keeps the name you type, instead of splicing it into the placeholder text. Deleting a take updates the project's take count in the left rail straight away. And an empty Data screen now says whether there is nothing there yet or a filter is hiding it, with the next step either way.
2026-09-03
This is the in-app release note from that date.
- Repair details name the measured frames a fill replaced. When a marker drops in and out repeatedly, Post fills the whole run in one pass, so a few frames your raw take still shows get replaced along with the gaps. The region card on the Review screen says how many measured frames a fill took over, and expands to list each stretch.
- Smoother fills for markers that flicker in and out. Those runs are filled as one continuous stretch where the surrounding capture supports it, and the repaired trajectory no longer jumps where the fills met. Where the capture does not support it, the gaps are still filled separately.
- When a cleanup cannot run, you get the real reason. A refused take shows that reason in the cleaner's own words, and no longer offers a retry that would be refused the same way.
- Gaps that could not be repaired are explained. A genuine exit, a capture dropout and a section that was never assessed are told apart, with counts, frames, duration and where to find them.
- An expired sign-in says so, instead of drawing an empty workspace.
- Upload and Data screen corrections. The first project keeps the name you type, take counts update immediately on delete, and an empty Data screen says whether it is empty or filtered.
- Clearer answers when you register takes through the API. A missing, blank or misspelled field is named in the message.
2026-09-01
This is the in-app release note from that date.
- Three views on the Before screen. The Before screen is where you read what a diagnosis found. It now has Regions, Curves and Takes. Regions lists the regions the diagnosis found in a take, worst first, and picking one sends the viewer and the charts straight to it. The
[and]keys step through the list. Curves puts the take's markers worst-first next to their curves. Takes keeps the rest of the batch one click away. - More room for charts on smaller screens. On a laptop screen the 3D viewer gives up some height so the charts stay readable, and the analysis panel can expand to fill the window while you study a curve.
Esccloses it again. - The viewer opens on the first problem. Opening a take on Before or After lands the playhead on the first region instead of frame 0.
- Exports say when the format changed. If your file could not be written in the exact format you asked for, the export screen and the take's version history tell you what was written instead and why. When nothing changed, they stay quiet.
- Sideways multi-performer takes. Captures with more than one performer could appear lying on their side in the 3D viewer. They now come in upright. That includes takes uploaded before this release, which correct themselves automatically, so no re-upload is needed.
- No made-up data for unlabelled marker clouds. If a take has nothing safe to clean, it says so instead of producing a fake result.
- Review and export polish. The Raw / Clean / Overlay buttons show when a view is still loading instead of appearing to do nothing, stepping through problems no longer gets stuck on a long region, and export notes no longer repeat the same reason twice.
Ask us
Something looks wrong on a take? Write to support@kapnetix.ai and send the take id, or the take's name and the project it sits in.